Marble Stone Flooring Installation by Bhandari Marble Group
What is Marble Stone?
Marble is a metamorphic stone, formed under intense heat and pressure that ultimately transforms the rock composition. It is a soft rock, with a porous nature. For flooring purposes, it is mostly used in the living rooms, bedrooms and bathrooms. Marble comes in different colours like- white, black, greenish blue, brown, black, pink, grey, beige and etc.
Bhandari Marble Group-Marble Stone Flooring Installation Process
Step 1 – Prepping the Surface
In a new construction, the flooring is raw and hence there is no need to break the flooring into pieces. On raw flooring, one has to put a 2 inches thick paste of Crushed Sand and Cement in the ratio of 7:1, hence for laying a 200 Sq. Ft. Flooring, 14 flagons of crushed sand and 2 flagons of cement are used.
In case of an old construction also, there is no need to break the existing floor. Floor is laid just after applying the mixture of Crushed sand and Cement in the ratio 5:1; hence use of 10 flagons of crushed sand and 2 flagons of cement is enough to maintain the thickness around 1.5 Inches.
Step 2 – Laying the Marble Stone Slab
The next step is to lay the slabs on the floor. All the pieces are to be set equally height-wise – a wooden tool is popularly used to align it well. The skirting is installed the next day.
Bhandari Marble Group
Step 3 – Sticking the Slabs Together
Normally white cement or epoxy is used to stick kota slabs together but high thixotropic knife-grade mastic is a good option to give the flooring a neat finish.
Bhandari marble group
Step 4 – Cutting the marble Stone Slab
There is need to cut marble Stone slabs as they are already easily available in tile-form in the market. However, in order to make repairs on the laid flooring, cutting is used to make adjustments. And yes! Cutting is needed for the skirting.
Step 5 – Initial grinding of floor
Floor is grinded with diamond grit from 30 to 100 using a floor grinding machine.
• Diamond Grits
• Grinding Machine
• Floor Grinding
Step 6 – Filling
Grout is filled with epoxy or high thyrotropic knife-grade mastic.
Bhandari marble group
Step 7 – Final grinding
Grinding is done again with diamond grits ranging from 200 to 3000 after the filling dries up.
Bhandari marble group
Step 8 – Polishing
After final grinding, flooring is polished using Polishing Powder with a red scrubbing pad.
Bhandari marble group
Step 9 – Crystallization
In the end, crystallization is done using a crystallization chemical with a white scrubbing pad.
BHANDARI MARBLE GROUP
We are one of the greatest marble manufacturers, suppliers, and exporters of all kind of marble stones like marble, Italian marble, Marble Flooring, Onyx marble, Statuario marble, Sandstone, Kishangarh marble, Indian marble, Makrana marble, and Granite at an affordable price. Looking for any kind of quality marble, granite in India or anywhere in the world, you are at the best place. We provide quality marble, Granite, Limestone etc in India or anywhere in all over the world at wholesale price.
BHANDARI MARBLE GROUP
India
Rajasthan
Kishangarh
305801
Contact us
+91 9672941111
+91 9829040013